series 67a hall effect joystick features ? proportional output ? shaft and panel seal to ip67 ? compact: 1-inch square flange ? long operational life ? rohs compliant applications ? medical ? military vehicles and devices ? mobile electronics for outdoor use dimensions in inches (and millimeters) ?1.007.003 [?25,580,07] 4x hole for #2 screw, self-tapping or machine thread square 1.000 25,4 [ ] t y p. .500 12,7 [ ] square 1.300 33,02 [ ] square 1.000 25,4 [ ] ? 4 places .100 2,54 [ ] r 4 places .100 2,54 [ ] c-bore, 4 places ? .070 [1,78] .180 4,57 [ ] recommended panel cutout triangle indicates +y direction for joystick output shaft travel any direction 20 .120 3,05 [ ] shaft pivot point .087 2,21 [ ] 1.115 28,32 [ ] .727 18,47 [ ] mounting surface connector is amp, p/n 7-215083-6 ? .520 13,21 [ ] ? 1.000 25,4 [ ] .560 14,21 [ ] pin header version 80 20 degrees shaft travel, joystick output along x or y axis -80 -20 joystick output waveform not to scale 5 -5 joystick operational limits triangle marking on mounting bracket indicates +y direction for joystick output (0,80) (0,-80) (80,0) (-80,0) (0,1) (0,-1) (1,0) (-1,0) sleep zone not to scale -y +y -x +x grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.grayhill.com joysticks joysticks
ordering information for prices and custom confgurations, contact a local sales offce, an authorized distributor , or grayhill's sales department. termination: c = .050 cable with connector, p = .050 pin header 67a - df- 3c - 030c cable length: 020 = 2.0 inches through 6.0 inches (060). 1 inch increments leave blank if pinned. example: 67a-df-3c-p interface: c = 12c voltage: 3 = 3.3v knob style: f = fingertip number of axes: d = dual axis (x&y) grayhill series number specifications electrical ratings supply voltage (vvd): 3.3v .0.3v high level input voltage (vih, min): 0.7*vdd on scl & sda / 0.25*vdd+0.8 on aln low level input voltage (vil, max): 0.3*vdd on scl & sda / 0.15*vdd on aln current draw in active mode (iddi): 3ma maximum @ vdd = 3.3v current draw in sleep mode (idd2): 100ua maximum @ vdd = 3.3v maximum current sunk by any i/o pin : 25ma leakage current: 5 na typ., 125 na max low level output voltage (vol): 0.6v on intn & sda @ iol = 6ma, @ vdd = 3.3v measurement frequency (active mode): 50 samples/sec response time, active mode (t1): 20ms* response time, sleep mode (t2): 80ms* output @ maximum joystick defection (xmax, ymax): 80 units output with joystick shaft released (cen - ter position) : (0,0) nominal startup time (tp, w): 300ms, max physical & mechanical ratings vibration: random, tested per mil-std-810g, method 514.6, procedure i mechanical shock: tested per mil-std 202, method 213b test condition a transit drop : tested per mil-st-810g, method 516.6, procedure ii terminal strength: 10 lbs. minimum, tested per mil-std-202, method 211a push-out force: 60 lbs. minimum pull-out force: 60 lbs. minimum shaft impact: 0.5 lbs. weight dropped 20x from height of 1m shaft side-load: 45 lbs. minimum mounting torque: 3-5 in-lbs recommended, 8 in-lbs. maximum joystick actuation force : 300g peak 25% joystick life: 1 million cycles minimum** environmental ratings seal: ip67, tested per iec 60529 altitude: tested per mil-std 202, method 105c thermal shock: tested per mil-std 202, method 107g operating high temperature: + 85c, tested per iec 68-2-14, test na operating low temperature: -40c, tested per iec 68-2-14, test na storage high temperature: + 100c, tested per iec 68-2-2, method ba storage low temperature: -55c, tested per iec 68-2-1, method aa humidity: tested per mil-std 202, method 103b humidity, 85/85: tested per mil-std 202, method 103b, 500 hours solar radiation: tested per mil-std 810g, method 505.5, procedure ii chemical resistance: tested per iso 16750-5 dielectric: tested per mil-std 202g, method 301 insulation resistance: tested per mil-std 202g, method 302 emc ratings radiated immunity: tested per iec 61000-4-3 conducted immunity: tested per iec 61000-4-6 radiated emissions: tested per ansi c63.4 conducted emissions: tested per en 55022 electrostatic discharge: tested per iec 61000-4-2 power frequency magnetic field: tested per iec 61000-4-8 *response time is the time from joystick movement to when new x,y position data is available. **one cycle is defned as a complete revolution of the shaft around the fxed perimeter , or one actuation in each of the 4 main directions, with return to center between each actuation. block diagram optical and mechanical encoders grayhill, inc. ? 561 hillgrove avenue ? lagrange, illinois 60525-5997 ? usa ? phone: 708-354-1040 ? fax: 708-354-2820 ? www.grayhill.com joysticks joysticks
|